Part of complete coverage on
Light-up wheels turn your bike into a 'Tron Cycle'
Revolights are a set of wheel-mounted LED's that increase cycle visibility, making it safer to ride at night.
Light up the way
Using innovative technology
Timed LED blinking
Jump and go
- Revolights are a set of wheel-mounted LEDs which increase cycle visibility
- The project raised five times the goal funding on Kickstarter in 2011
- Now the team is looking to Kickstarter again to develop wheels with in-built lights
- The lights are timed to blink depending on the speed the bike goes, preventing them from blinding riders
(CNN) -- Anyone that bikes dreams of riding a Tron Light Cycle. Revolights, a set of wheel-mounted LEDs, now makes that dream a little closer to reality, and a new built-in version is helping that system become even more lightweight and simple than the original bolt-on setup.
The white-and-red lighting comprises a ring of LEDs that you install around the entire edge of each of your bike rims. Using a pair of clever devices, only the forward-facing lights (or backwards, in the case of the rear wheel) illuminate when the wheel spins. The result is beautiful arcs of light that make you visible from all angles, an effect that Revolights' co-founder and CFO Adam Pettler says came by accident.
Revolights inventor Kent Frankovich didn't set out to produce the arcs, instead he was looking for a better headlight design, one that would make obstacles stand out more clearly though low angle lighting. The timed blinking of the lights was to prevent them from shining in a rider's eyes. "It wasn't until after he had created the first prototype that we realized the huge increase in rider visibility that came with it," Pettler says, "He then quickly made a red taillight to match."
Read: Ex-cop builds robot from household goods
We designed Revolights Wheels to address our largest design challenges: installation and compatibility
Adam Pettler, Revolights' co-founder and CFO
The lights use two mechanisms to tell the LEDs when to turn on and off. At low speeds, an accelerometer determines the position of the lights by reading the pull of gravity. At higher velocities, the lights switch over to calculating speed based on the wheel's period of rotation. That allows the system to synchronize a cascading LED pattern.
This is Revolights' second Kickstarter campaign. The first one was completed in 2011, raising five times its initial goal. Pettler says this second Kickstarter is being done to celebrate the release of a v2 version of the product. Interestingly, the revamped Revolights City v2.0 kits aren't one of the Kickstarter rewards.
"The City represents our second product, designed with the goal of making Revolights more accessible," says Pettler. "And while it is a new product we now offer, Revolights City is an aftermarket kit you install on your own wheels, and we felt putting it on Kickstarter would be too similar to our last campaign."
Read: Introducing the world's tiniest fisheye camera
So they went bigger. The current Kickstarter is for custom wheels with the lights built right in. It's a project created in partnership with Mission Bicycle Company (also a Kickstarter alum).
"We designed Revolights Wheels to address our largest design challenges: installation and compatibility," says Pettler. "While many cyclists enjoy their existing wheels and want to put Revolights on them, there's a whole other group of riders out there that don't want to install their own lights."
It's a smart way of using Kickstarter. For simple product updates, there's no need (and indeed some discouragement) for using Kickstarter. But by putting together an ambitious product for the crowd funding site and timing that to coincide with an update of your more stable product, you get the best of both worlds as a creator.
Subscribe to WIRED magazine for less than $1 an issue and get a FREE GIFT! Click here!
Copyright 2011 Wired.com.
Part of complete coverage on
April 9, 2014 -- Updated 1708 GMT (0108 HKT)
Forget wearable tech, embeddable implants are here. Learn more about the pioneers who are implanting devices into their bodies.
March 31, 2014 -- Updated 1215 GMT (2015 HKT)
iRobot, creators of vacuuming robot Roomba reveal how they learned from secret experiments -- in space travel, minefields, and toys.
March 28, 2014 -- Updated 1623 GMT (0023 HKT)
A light-bulb glowing in middle of a room with no wires attached. "It's the future," says Dr Katie Hall.
March 3, 2014 -- Updated 1626 GMT (0026 HKT)
Knee replacements that encourage cells to regrow could soon be manufactured -- by spiders. Find out how.
February 14, 2014 -- Updated 1403 GMT (2203 HKT)
Meet Chuck Hull: the humble American engineer who changed the world of manufacturing.
February 6, 2014 -- Updated 1448 GMT (2248 HKT)
The key to self-knowledge? Or just the return of the phony "mood ring"? Check out our top mood-sensing technology in development.
February 21, 2014 -- Updated 2201 GMT (0601 HKT)
One of the Games' most impressive spectacles has nothing to do with sports. It's visitors' own faces, rendered on a giant morphing wall.
February 4, 2014 -- Updated 0952 GMT (1752 HKT)
Inside the incredible cardboard Boeing 777 that's taken one man 10,000 hours to build.
January 30, 2014 -- Updated 1611 GMT (0011 HKT)
We climb inside the Aouda.X: an "intelligent" spacesuit designed for the most treacherous environment yet to be encountered by a human.
January 24, 2014 -- Updated 1423 GMT (2223 HKT)
The world's fastest supercar might soon be electric. The Rimac Concept_One is the Tesla-beating electric car, capable 300 kph.
January 8, 2014 -- Updated 2045 GMT (0445 HKT)
Is that Tupac and Sinatra performing live? How did that happen?! Meet Eyeliner: the optical system that can bring the dead back to life.
January 15, 2014 -- Updated 1319 GMT (2119 HKT)
From wearable technology to space tourism: we take a look through some of the most ground-breaking developments of the year ahead.
December 19, 2013 -- Updated 1216 GMT (2016 HKT)
In the past 12 months, several ventures have managed to raise over $1 million. Check out the projects that joined the Kickstarter millionaires' club.
December 9, 2013 -- Updated 1002 GMT (1802 HKT)
Watch digital artist Kyle Lambert's stunning photo-realistic iPad paintings emerge from a blank screen.
Today's five most popular stories